Specifications

Brand: HP
Model: 657134-001
MPN: 657134-001

Device Type: Mother Board
Form factor: uATX: 24.38 cm (9.6 inches) x 24.38 cm (9.6 inches)
Chipset: AMD Hudson-D2 FCH
Front Side Bus Speed: 100 MHz UMI (United Media Interface)
CPU Support: 65W to 100W (processor dependent)
Socket type: FM1

Motherboard supports the following processor upgrades:

Processor

AMD A8-3850 (Liano) quad core TDP: 100W
AMD A8-3800 (Liano) quad core TDP: 65W
AMD A6-3650 (Liano) quad core TDP: 100W
AMD A6-3600 (Liano) quad core TDP: 65W
AMD A4-3400 (Liano) dual core TDP: 65W
AMD E2-3200 (Liano) dual core TDP: 65W

Memory upgrade:

Dual channel memory architecture

Two 240-Pin DDR3 DIMM Sockets

Supports DDR3 DIMMs

PC3 10600 (1333 MHz)

PC3 12800 (1600 MHz)

PC3 14400 (1866 MHz)

Non-ECC Memory Only, Unbuffered

Supports 1 GB, 2 GB or 4 GB DIMMs

Supports up to 4 GB on 32-bit Systems

Supports up to 8 GB on 64-bit Systems

NOTE: 32-bit Systems Cannot Address a Full 4.0 GB of Memory

Video:

Integrated video is not available if a graphics card is installed.

Supports PCI Express x16 Graphics Cards

DVI and VGA ports (Use of Both the VGA and DVI Ports at The Same Time is Supported)

Audio:

Built-in High Definition 5.1 Channel Audio

Audio Codec: Realtek ALC 656

Network, Integrated 1000 Base-T:

Interface: PCI Express x1

Technology: Realtek RTL8111E gigabit ethernet controller

Data Transfer Speeds: up to 10/100/1000 Mb/s

Transmission Standards: 1000-Base-T Ethernet

Expansion slots:

PCI-Express Generation 2 Speed

One PCI Express x16

Three PCI Express x1

One PCI Express mini card

I/O Ports:

1 DVI-D

2 VGA

3 USB 2.0: 4

4 LAN

5 Audio: Line In Port (light blue)

6 Audio: Line Out Port (lime)

7 Audio: Microphone Port (pink)

Internal Connectors:

1x ATX Power Connector

ATX CPU Power Connector X1

System FAN Connector X1

SATA 2.0 Connectors X6

ROM Recovery Connector X1

Front Panel Audio Connector X1

FDO Connector X1

Front Panel Connector X1

USB 2.0 Connectors X4

Contact us if you have any question about this product to verify this model’s compatibility with your current server or storage array.